#!/bin/bash
# Ein einfaches Script, das ein geda-Projekt nach dem Geschmack von
# ---<(kaimartin)>--- anlegt. 

# This program is copyright (C) 2009-2014, Kai-Martin Knaak
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 3 as
# published by the Free Software Foundation. 
# For details see http://www.gnu.org/licenses/gpl.txt


help () {
    echo "Usage: "$0" <--skel |--git | --help> NAME"
    echo "A simple script to start a new geda project from scratch."
    echo 'Necessary tools: finger, whoami, date, '
    echo "   --git  : set up a git repository in /var/cache/git. Requires sudo privilege."
    echo "   --skel : install the basic structure of a geda project in the current dir."
    echo "   --help : this help message"
    exit 1;
}

[ $# -lt 2 ] && help

action=$1
shift 1

SELF=$0
NAME=${1%/}		# This strips leading slashes from the project name
USER=`whoami`
AUTHOR=`finger $USER | awk 'BEGIN {FS = ": "} ; $0 ~ /Name/ {print $3}'`
AUTHORSHORT=$USER
FOOTPRINTLIB="~/geda/gedasymbols/kai_martin_knaak/footprints:$PWD"
DATE=`date +%d.%m.%Y`
VERSION="v1"      # The version string to be used in gerber- and print scripts"

# Absolute path of the Script.
# Note, this requires GNU readlink. So it might not work for Mac and BSD users.
PFAD=`dirname $(readlink -f $0)`
#PFAD="/afs/iqo.uni-hannover.de/products/gedasymbols/www/user/kai_martin_knaak"

# derive a low case only version of the user name. (e.g. for dokuwiki integration)
name=`echo $NAME | tr [:upper:] [:lower:]`

################################################################################
skel () {

mkdir $NAME
cd $NAME
mkdir doc
mkdir gerber
mkdir versions
mkdir gehaeuse
mkdir print
mkdir bom
cp $PFAD/layoutdruck.sh print/layoutdruck_$name.sh
cp $PFAD/schaltplandruck.sh print/schaltplandruck_$name.sh
cp $PFAD/bomdruck.sh bom/bomdruck_$name.sh

# The project file for gsch2pcb
# Use only local footprints, no m4, no global defaults.
echo \
"schematics "$name".sch
output-name "$name"
skip-m4
verbose
elements-dir "$FOOTPRINTLIB"
use-files
" > $name.g2p

# The attributes to be used for the bill of materials
echo \
"footprint
value
description
" > bom/attribs


# Add a local gnetlistrc. Hierarchy is enabled by default
echo \
"
; local gnetlistrc
; automatically installed by \"$SELF\" on \"$DATE\"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(hierarchy-traversal \"enabled\")

(hierarchy-uref-mangle \"enabled\")
(hierarchy-uref-separator \"\")

(hierarchy-netname-mangle \"enabled\")
(hierarchy-netname-separator \"/\")

(hierarchy-netattrib-mangle \"enabled\")
(hierarchy-netattrib-separator \"/\")

(unnamed-netname \"noname\")
" > gnetlistrc


# Add a local gschemrc
echo \
";  This is a local gschemrc automatically installed on "$DATE" for 
; project "$NAME".
; Add any configuration details specific to this project here.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

" > gschemrc


echo "Add a script to create gerber files and zip them for the fab"
echo \
'#!/bin/sh
# produce gerber files, packages them in a zip file and open gerbv

NAME='$name'
VERSION='$VERSION'
LAYOUT='../$NAME.pcb'

pcb -x gerber --metric --gerberfile $NAME"_"$VERSION --name-style first $LAYOUT

echo "Add a README for the fab"
echo \
"Diese zip-Datei enthält Gerberdaten für das Projekt:
	"$NAME", "$VERSION"

Inhaltliche Bedeutung der Dateien

"$NAME"_"$VERSION".bottommask.gbr	-- Lötstoppmaske, Unterseite 
"$NAME"_"$VERSION".bottompaste.gbr	-- Lötpaste, Unterseite
"$NAME"_"$VERSION".fab.gbr		-- Lage und Durchmesser der Löcher
"$NAME"_"$VERSION".top.gbr		-- Kupfer, Oberseite (1. Lage)
"$NAME"_"$VERSION".topmask.gbr		-- Lötstoppmaske, Oberseite
"$NAME"_"$VERSION".toppaste.gbr		-- Lötpaste, Oberseite
"$NAME"_"$VERSION".topsilk.gbr		-- Bestückungsdruck, Oberseite
"$NAME"_"$VERSION".comment.gbr		-- Kommentare/Anmerkungen
"$NAME"_"$VERSION".outline.gbr		-- Umriss der Leiterplatte
"$NAME"_"$VERSION".plated-drill.cnc	-- Koordinaten metallisierter Löcher
"$NAME"_"$VERSION".unplated-drill.cnc	-- Koordinaten unmetallisierter Löcher
" > gerberdaten_"$NAME"_"$VERSION".README

# compress the gerbers into a zip file
zip "gerberdaten_"$NAME"_"$VERSION.zip \
gerberdaten_$NAME"_"$VERSION".README" \
$NAME"_"$VERSION*.gbr \
$NAME"_"$VERSION*.cnc

# open the gerbers with gerbv
gerbv $NAME"_"$VERSION*.gbr

' > gerber/do_$NAME"_gerbers.sh"
chmod u+x gerber/do_$NAME"_gerbers.sh"



echo "add a gafrc to the versions folder"
echo \
"; gafrc for a self contained repo of a geda project.
; All symbols should be embedded in the schematic, or local to this folder.
(reset-component-library)
(reset-source-library)

; Allow to source symbols from the current working directory
(define current-working-directory (getenv \"PWD\"))
(component-library current-working-directory)
(source-library  current-working-directory)
" > versions/gafrc


#########################Create an empty schematic###########################
echo "Create a schematic with a title block filled with name and current date."
echo \
"v 20140308 2
C 40000 40000 0 0 0 title-block.sym
{
T 52100 41300 5 30 1 1 0 4 1
Title="$NAME"
T 51400 40300 5 16 1 1 0 4 1
filename="$name".sch
T 55850 41500 5 16 1 1 0 4 1
revision=revision
T 56050 40100 5 16 1 1 0 6 1
page=1
T 56200 40100 5 16 1 1 0 0 1
number_of_pages=1
T 55850 40850 5 12 1 1 0 4 1
date="`date +%d.%m.%y`"
T 54350 40450 5 16 1 1 0 4 1
author="$AUTHORSHORT"
T 49000 42900 5 8 0 0 0 0 1
symversion=1.0
}" > $name.sch


#########################Create an empty layout##############################
# This starts pcb and executes a couple of actions through a pipe.
echo "Create an empty layout"
echo \
"ChangeName(Layout) "\
"SaveTo(LayoutAs,"$name".pcb) "\
"Quit() "\
| pcb --listen \
 --fab-author \"$AUTHOR\" \
 --grid "0.5mm" \
 --grid-units "mm" \
 --draw-grid "no" \
 --clear-line "yes" \
 --full-poly "yes" \
 --unique-name "no" \
 --snap-pin "yes" \
 --save-in-tmp  "yes" \
 --all-direction-lines "no" \
 --show-number "no" \
 --text-scale "100" \
 --groups "1,2,3,c:4,5,5,s:7:8" \
 --layer-name-1 "top" \
 --layer-name-2 "top-polyg." \
 --layer-name-3 "top-GND" \
 --layer-name-4 "bottom" \
 --layer-name-5 "bott.-poly." \
 --layer-name-6 "bott.-GND" \
 --layer-name-7 "comment" \
 --layer-name-8 "outline" \
 --bloat 0.15mm \
 --shrink 0.1mm \
 --min-width 0.4mm \
 --min-silk 0.3mm \
 --min-drill 0.3mm \
 --min-ring 0.15mm \
 --route-styles \
"Skinny,0.1500mm,0.6000mm,0.4mm,0.5000mm\
:Signal,0.3000mm,1.0000mm,0.6000mm,0.5000mm\
:Power,0.6000mm,1.0000mm,0.6000mm,0.5000mm\
:Fat,1.2000mm,1.5000mm,1.000mm,0.5000mm" \
 --default-PCB-width 10cm \
 --default-PCB-height 10cm \
 --grid-increment-mm 1mm \
 --grid-increment-mil 20mil \
 --size-increment-mm 0.2mm \
 --size-increment-mil 10mil \
 --line-increment-mm 0.1mm \
 --line-increment-mil 10mil \
 --clear-increment-mm 0.5mm \
 --clear-increment-mil 10mil


###############begin LyX template###################################
echo "Create documentation file in lyx format"
echo \
"
#LyX 1.6.2 created this file. For more info see http://www.lyx.org/
\lyxformat 345
\begin_document
\begin_header
\textclass scrartcl
\use_default_options true
\language ngerman
\inputencoding auto
\font_roman default
\font_sans default
\font_typewriter default
\font_default_family default
\font_sc false
\font_osf false
\font_sf_scale 100
\font_tt_scale 100

\graphics default
\paperfontsize default
\spacing single
\use_hyperref true
\pdf_title \""$NAME"\"
\pdf_author \""$AUTHOR"\"
\pdf_subject \""$NAME"\"
\pdf_keywords \"geda\"
\pdf_bookmarks true
\pdf_bookmarksnumbered false
\pdf_bookmarksopen false
\pdf_bookmarksopenlevel 1
\pdf_breaklinks false
\pdf_pdfborder false
\pdf_colorlinks true
\pdf_backref section
\pdf_pdfusetitle true
\pdf_pagemode FullScreen
\papersize a4paper
\use_geometry false
\use_amsmath 1
\use_esint 1
\cite_engine natbib_numerical
\use_bibtopic false
\paperorientation portrait
\secnumdepth -1
\tocdepth 2
\paragraph_separation skip
\defskip medskip
\quotes_language english
\papercolumns 1
\papersides 1
\paperpagestyle default
\tracking_changes false
\output_changes false
\author ""
\author ""
\end_header

\begin_body

\begin_layout Title
"$NAME"
\end_layout

\begin_layout Author
"$AUTHOR"
\end_layout

\begin_layout Abstract
Ein tolles, Projekt, das die Welt retten wird.
\end_layout

\begin_layout Section
Ziel
\end_layout

\begin_layout Standard
Zielgerichtete Zielbeschreibung
\end_layout

\begin_layout Section
Schaltungsprinzip
\end_layout

\begin_layout Standard
Wie wirds elektrisch errreicht?
\end_layout

\begin_layout Section
Bauteile
\end_layout

\begin_layout Subsection
Besondere Komponenten
\end_layout

\begin_layout Standard
Mit ganz besonderen Eigenschaften.
\end_layout

\begin_layout Section
Versorgung
\end_layout

\begin_layout Standard
Wo der Saft herkommt
\end_layout

\begin_layout Section
Anschlüsse und Bedienelemente
\end_layout

\begin_layout Section
Gehäuse
\end_layout

\begin_layout Section
Eigenschaften
\end_layout

\begin_layout Standard
Wie gut es tut, was es tut.
\end_layout

\begin_layout Section
Bedienung
\end_layout

\begin_layout Section
Bilder
\end_layout

\begin_layout Section
Schaltplan
\end_layout

\begin_layout Section
Bestückungsplan
\end_layout

\begin_layout Section
Materialpreis
\end_layout

\begin_layout Section
Meckerliste
\end_layout

\end_body
\end_document
" > doc/$name.lyx
#######################End LyX template################

} # end of skel sub routine
################################################################################


#initialize a git repository####################################################
init_git () {
if [ -d "$NAME" ]; then cd $NAME ; fi

if [ ! -d ../$NAME ]
     then echo "No project "$NAME" found! --> quitting."
     exit 1
   fi

if [ -d ".git" ]; then echo "git repo already exists! --> quitting" ; fi

echo "initialize a git repository"$NAME" in "$PWD
echo "and a bare clone in /var/cache/git/"$NAME"."

# .gitignore: the file patterns, git should ignore
echo \
"
\# To be ignored by git:
*~
*-
PCB.*.save
PCB.*.backup
*.bak
*.bak?
*.new.pcb
*.cmd
\#*#
*.log
" > .gitignore

if [ -d gerber ]; then
echo \
"
\# Do not include gerber files in git repo.
\# They can readily be reproduced when needed.
*.gbr
*.cnc
" > gerber/.gitignore
fi

# initilize a git repo in the current dir.
git init

# add everything to the repo
git add .

# first commit to the repo
git commit -m 'geda project $NAME initialized'

# Use color for git status
git config color.ui true

# add the branch "origin"
git config branch.master.remote origin
git config branch.master.merge refs/heads/master

# let origin point to where a bare repo is going to be installed
git remote add origin 'http://localhost/git/'$NAME'.git'
git remote set-url origin http://localhost/git/$NAME'.git'

# allow push via http. Needs git-http-backend configured in apache config.
git remote set-url --push origin http://localhost/git/$NAME'.git'

# install a bare clone in /var/cache/git
sudo git clone --bare . "/var/cache/git/"$NAME'.git'
sudo touch '/var/cache/git/'$NAME'.git/git-daemon-export-ok'
sudo echo 'geda project '$NAME' > /var/cache/git/'$NAME'.git/description'

# the bare repo needs to be writeable by apache
sudo chown www-data:iqo '/var/cache/git/'$NAME'.git' -R
sudo chmod g+w '/var/cache/git/'$NAME'.git' -R

} #end git related stuff########################################################

#main###########################################################################
case $action in
    --skel)
	skel
	;;
    --git)
	init_git
	;;
    *)
	help
	;;
esac

echo "Done with project "$NAME