# Kicad module converted to gEDA PCB footprint by: Erich Heinzle # Kicad module converted from Eagle library by oshec.org # All rights reserved by original authors # No warranties express or implied # Footprint converted from Kicad Module inductors-jwmiller-M1333 # dist-license: GPL # use-license: unlimited # Users of the foot print must ensure that the solder mask reliefs and clearances # are compatible with the PCB manufacturer's process tolerances # Pins and SMD pads have been converted from Kicad foot prints which # do not have solder mask relief or clearances specified. # Fairly sane default values have been used for solder mask relief and clearances. # Kicad module units: 0.1 mil # Footprint = module name: inductors-jwmiller-M1333 # Text descriptor count: 1 # Draw segment object count: 16 # Draw circle object count: 0 # Draw arc object count: 0 # Pad count: 2 # Element["" ">NAME" "" "" 0 0 -5000 -11250 0 100 ""] ( ElementLine[-18750 2500 -17500 2500 260] ElementLine[-17500 2500 -17500 -2500 260] ElementLine[-18750 -2500 -17500 -2500 260] ElementLine[-18750 2500 -18750 -2500 260] ElementLine[17500 2500 18750 2500 260] ElementLine[18750 2500 18750 -2500 260] ElementLine[17500 -2500 18750 -2500 260] ElementLine[17500 2500 17500 -2500 260] ElementLine[-17600 -6890 17600 -6890 700] ElementLine[17600 -6890 17600 -4530 700] ElementLine[17600 -4530 17600 4530 700] ElementLine[17600 4530 17600 6890 700] ElementLine[17600 6890 -17600 6890 700] ElementLine[-17600 6890 -17600 4530 700] ElementLine[-17600 4530 -17600 -4530 700] ElementLine[-17600 -4530 -17600 -6890 700] Pad[-16730 0 -12790 0 7870 2000 8670 "" "1" "square"] Pad[12790 0 16730 0 7870 2000 8670 "" "2" "square"] )