# Kicad module converted to gEDA PCB footprint by: Erich Heinzle # Kicad module author: Bernd Wiebus # No warranties express or implied # Footprint converted from Kicad Module Choke_Toroid_horizontal_Diameter3-5mm_Amidon-T12_RevA_06Aug2010 # dist-license: GPL # use-license: unlimited # Users of the foot print must ensure that the solder mask reliefs and clearances # are compatible with the PCB manufacturer's process tolerances # Pins and SMD pads have been converted from Kicad foot prints which # do not have solder mask relief or clearances specified. # Fairly sane default values have been used for solder mask relief and clearances. # Footprint = module name: Choke_Toroid_horizontal_Diameter3-5mm_Amidon-T12_RevA_06Aug2010 # Text descriptor count: 1 # Draw segment object count: 12 # Draw circle object count: 2 # Draw arc object count: 0 # Pad count: 2 # Element["" "L" "" "" 0 0 0 -15000 0 100 ""] ( ElementLine[-7090 0 -3150 0 1500] ElementLine[-3150 0 -5910 3150 1500] ElementLine[-5910 3150 -2360 1970 1500] ElementLine[-2360 1970 -3150 5910 1500] ElementLine[-3150 5910 -390 2760 1500] ElementLine[-390 2760 -390 6690 1500] ElementLine[-390 6690 1180 2360 1500] ElementLine[1180 2360 3940 5510 1500] ElementLine[3940 5510 2360 1570 1500] ElementLine[2360 1570 5910 2760 1500] ElementLine[5910 2760 3150 0 1500] ElementLine[3150 0 6690 0 1500] ElementArc[0 0 2760 2760 0 360 1500] ElementArc[0 0 7090 7090 0 360 1500] Pin[-12990 0 7870 2000 8670 3150 "" "1" ""] Pin[12990 0 7870 2000 8670 3150 "" "2" ""] )